Before First Use; Daily Use - Washing Only - AEG L7WB86GW User Manual

22 www.aeg.com
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
8.4 Permanent Extra Rinse
With this option you can permanently
have one or two extra rinses when you
set a new programme.
• Simultaneously touch the Temp.
button and the TPM button once to

9. BEFORE FIRST USE

1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
3. Pour 2 litres of water into the
detergent compartment marked by
.
This action activates the drain system.
4. Pour a small quantity of detergent
into the compartment marked by
.

10. DAILY USE - WASHING ONLY

WARNING!
Refer to Safety chapters.
10.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the Aan/Uit button for a few
seconds to activate the appliance.
The indicator of the Start/Pauze
button starts flashing.
The programme dial is automatically set
on Cotton programme and only the
indicator Wassen is on above the Modus
button.
The display shows the maximum load,
the default temperature, the maximum
spin speed, the indicators of the phases
making up the programme and the cycle
duration.
add one extra rinse.
the display.
• Simultaneously touch the Temp.
button and the TPM button twice to
add two extra rinses.
the display.
• Simultaneously touch the Temp.
button and the TPM button three
times to remove extra rinses. The
display only shows
5. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
10.2 Loading the laundry
1. Open the appliance door.
2. Shake the items before you put them
in the appliance.
3. Put the laundry in the drum, one item
at a time.
Make sure not to put too much laundry
in the drum.
4. Close the door firmly.
appears on
appears on
.