Ethernet Adapter setting
1
On the Device window, double click the [Ethernet] icon to open the Device Configuration
window.
2
Open [General] tab.
3
Click the button next to [Interface] textbox, and select [eth0] in the list.
Modbus TCP Master Device setting
When it is not connected to the slave and intend to run the re-connection process, check off the
[Auto-reconnect].
However, if communication with the slave cannot be performed, the cycle time to collect Modbus
data is delayed since it waits for the reconnection process to time out.
1
On the Device window, double click the [Modbus_TCP_Master] icon to open Device
Configuration window.
2
Open [General] tab.
3
Check off the [Auto-reconnect].
—
Programing with CODESYS
CPSN-PCB271-S1-041 Reference Manual (Software)
— 86 —
—