Playback Mode - Parksafe VISION PSV126 User Manual

Recording: (Continued)
If you want to protect the current recordings, then press the SOS button, the
emergency icon will appear on the screen, This indicates that those recordings
have been locked and will not be overwritten by new video clips.
In recording mode, press OK button to stop recording , then press up button to
enter into playback mode.

Playback Mode:

In Standby mode, press the Down button to enter playback mode. The device
stores the video on the Micro SD Card. Playback mode will allow you to review
the saved video and play back the video with sound.
If you wish to delete or protect the file, press the OK button to access the
playback setting menu.
To return to record mode, press and hold the RETURN button.
Connecting to a PC:
The PSV126 can be connected to a PC by using a USB data cable (not
supplied). The supplied USB cable is for charging and supplying power only.
When the device is connected to the PC, mass storage is displayed on the
device's screen. You can view the Micro SD card contents on the PC. When
the device is detected on the PC as an external drive, select to view the DCIM
folder. Recordings or images are arranged in folders.
The locked and protected recording files have a locked icon on the thumbnail
of the file and start with LOCK name. The park mode recording files will start
with PARK name.
Please Note:
• Improper operation will cause the device to crash. In the event that this
occurs, press the reset button to return the camera to default settings.
• Don't leave the camera in direct sunlight or where the temperature could go
above 60 degree for long time
PARKSAFEAUTOMOTIVE.COM