Video Recording Settings - Parksafe VISION PSV126 User Manual

Table of Contents

Advertisement

Micro SD Card Installation and Removal:
1. Insert the Micro SD card into the Micro SD card slot
2. To take out the Micro SD card, please gently press down the Micro SD card
until it releases from the Micro SD card slot.
Cautions:
3. Please pay attention to the direction of the Micro SD card when inserting.
4. If the device and Micro SD card is incompatible, insert a different Micro SD
card and try again.
5. Please use a high speed Micro SD card (Class 6 or above)

Video recording settings:

In standby mode, press OK button to enter video settings, then press the Up/
Down buttons to choose the menu you want. Press OK button to confirm.
1. Video Resolution: 1080FHD 1920X1080 / 1080P 1440X1080 / 720P
1280X720 / WVGA 848X480 / VGA 640X480 / GVGA 320X240
2. Loop recording: Off / 1 Minute / 3 Minutes
3. Park mode: Off / On
4. Record Audio: Off / On
5. Date Stamp: Ev: Off / On
6. G-sensor: Off / High / Medium / Low
7. Date/Time: YY/MM/DD
8. Auto Power Off: Off / 1 Minute / 3 Minutes
9. Beep Sound: Off / On
10. Languages: English / Deutsch / Français / Español / Português / Italiana /
简体中文 / 日本語
11. LCD OFF: Off / 30 Seconds / 1 Minute / 3 Minutes
12. Format: Cancel / OK
13. Default Setting: Cancel / OK
14. Card Volume
15. Version
Recording:
When connected to a car charger, the device automatically goes into the
record mode and starts recording, the
A flashing red dot
recording, press OK button and the red dot disappears, indicating that the
recording has stopped.
icon flash indicates that the device is recording. To stop
PARKSAFEAUTOMOTIVE.COM
icon will display on the screen.

Advertisement

Table of Contents
loading

Table of Contents