Setting A Standing Time; Setting A Delayed Start - Panasonic NN-SN97HS Owner's Manual

Setting a Standing
Time
1
Some recipes call for a
standing time after cooking.
To do this, repeat steps 1 and
2 in the Cooking section on
previous page. Then press
Cooking Timer .
2
Set desired amount of stand
time using Number pads (up
to 99 minutes, 99 seconds).
3
Press Start. The timer will
start and then beep twice at
the end of cooking time (the
beginning of standing time).
Five beeps will sound when
standing time is done.
Operation (continued)
Setting a Delayed
Start
1
The start time can be delayed
to start cooking at a later time.
To do this, first press Cooking
Timer.
2
Enter the desired delay time
(up to 99 minutes, 99 seconds)
using the Number pads.
3
Press Power Level until the
desired power level appears
in the display. P10 is the
highest and P1 is the lowest.
4
Set Cooking Time using the
Number pads (see previous
page for maximum times).
5
Press Start; the delay time will
count down, then cooking will
begin. At the end of cooking,
five beeps will sound.
12
NOTES:
1. When each stage finishes,
the oven will beep twice. At
the end of the program, the
oven will beep five times.
2. If the oven door is opened
during Stand Time, Kitchen
Timer or Delay Time, the
time on the display will
continue to count down.
3. Stand Time and Delay start
cannot be programmed
before any automatic
function (such as sensor
cook/reheat, popcorn,
Coffee/Milk and inverter
turbo defrost). This is
to prevent the starting
temperature of food from
rising.
4. When using Standing time
or Delay Start, it's up to 2
power stages.