Levelling - CDA CI926 Installation, Use And Maintenance Manual

without any vibration, it should be installed on a flat, non-slippery and
solid surface.
The machine must be positioned on a solid support, such as the bare
floor or a well-fitting riser, ensuring the machine is unable to fall when
subjected to the typical vibrations generated by a washing machine.

Levelling

To reduce the noise from the washing
machine and to prevent unnecessary
movement during use, ensure the
washing machine is level, using the
adjustable feet.
First, fix and level the rear feet. When
they are properly fixed, secure the
metal locknut tightly against the
underside of the washing machine.
• Put the washing machine into its required position.
• Then level the front feet in the same way as the rear feet.
Please note: Raising the washing machine too high can affect the
stability of the appliance.
Do not use wooden blocks, packaging or any similar means to
stabilise the appliance. Use only a flat, solid surface and the
appliance's feet.
33