Sureguard Pro-Tech 5 User Instructions page 9

Switch Energiser ON
Use the ON/OFF button on the
underside of the Energiser to switch
it ON or OFF.
When you switch the Energiser ON,
you will see two LED lights on the
Solar Panel. The POWER LED relates
to the charge in the battery. The
FENCE LED relates to the fence
voltage. Each LED can light Green,
Red or Blue. Refer to the table below
for what the colours mean. Two
green lights mean you are good to
go!
NOTE: Critical issues will cause the
LED to flash RED & Alarm Buzzer
sound. Read Advanced User Features
if you want to customise the Buzzer.
What the LED Colours Mean:
GREEN
RED
POWER
RED FLASHING
LED
BLUE
NOT LIT
GREEN
RED
FENCE
RED FLASHING
LED
BLUE
BLUE FLASHING
NOT LIT
Normal operation. The internal battery has plenty of power.
The internal battery is low. Check solar panel is clean and set up correctly.
Critically low battery. Rectify immediately! (Troubleshooting page 11)
Displayed while using the advanced optional Settings Switch (page 10).
The energiser is in stand-by mode waiting for the solar panel to charge the
battery. Power LED flashes RED momentarily about every few seconds
while charging.
The fence voltage is good.
The fence voltage is low. Check the condition of the fence.
The fence voltage is very low. Rectify immediately! The Energiser may be
pulsing more slowly. (Troubleshooting page 12)
You have selected the ON/OFF Timer. The fence is currently inactive. (Refer
to page 10).
It displays when you switch the energiser ON. It is analysing the fence
voltage.
The energiser is not powering the fence.
9