Standard Signal Mode Table - Samsung S22F380HY User Manual

Hide thumbs

Table Of Contents

Table of Contents

- This product can be set to only one

resolution for each screen size to obtain

the optimum picture quality due to the

nature of the panel. Using a resolution

other than the specified resolution may

degrade the picture quality. To avoid

this, it is recommended that you select

the optimum resolution specified for

your product.

- Check the frequency when you exchange

a CDT monitor (connected to a PC) for

an LCD monitor. If the LCD monitor

does not support 85 Hz, change the

vertical frequency to 60 Hz using the CDT

monitor before you exchange it with the

LCD monitor.

Standard Signal Mode Table

Model Name

Synchronization

Horizontal Frequency

Vertical Frequency

Resolution

Optimum resolution

Maximum resolution

If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. If the signal transmitted from the

PC does not belong to the standard signal modes, the screen may be blank even though the power LED turns on. In such a case, change the settings according to the

following table by referring to the graphics card user manual.

Resolution

Horizontal Frequency

(kHz)

IBM, 720 x 400

31.469

MAC, 640 x 480

35.000

MAC, 832 x 624

49.726

MAC, 1152 x 870

68.681