Subscribe to Our Youtube Channel
Related Manuals for Samsung S22F380HY
Summary of Contents for Samsung S22F380HY
- Page 1 Monitor User Manual S22F380HY The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
-
Page 2: Table Of Contents
Table of contents Before Using the Product Connecting and Using a Source Configuring SAMSUNG MAGIC Upscale Device HDMI Black Level Copyright Configuring the HDMI Black Level Settings Before Connecting Securing the Installation Space Eye Saver Mode Pre-connection Checkpoints Precautions for storage... - Page 3 Correct Disposal Troubleshooting Guide Configuring Off Timer Correct Disposal of This Product (Waste Electrical & Configuring Turn Off After Electronic Equipment) Requirements Before Contacting Samsung Customer Service Center PC/AV Mode Terminology Testing the Product Configuring PC/AV Mode Checking the Resolution and Frequency Source Detection Check the following.
-
Page 4: Before Using The Product
ⓒ 2015 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft, Windows are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association. -
Page 5: Securing The Installation Space
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used A serious or fatal injury may result if instructions are not followed. nearby. ― Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product Caution (Service fee will be charged.) Personal injury or damage to properties may result if instructions are not followed. -
Page 6: Cleaning
Cleaning Electricity and Safety ― Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. ― The following images are for reference only. Real-life situations may differ from what is shown in the images. ― Take the following steps when cleaning. ―... -
Page 7: Installation
Install the product at least 10cm away from the wall to allow ventilation. • An increased internal temperature may cause a fire. Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. - Page 8 SAMSUNG • Be sure to consult Samsung Customer Service Center if you want to install the product at such a place.
-
Page 9: Operation
If the product is dropped or the outer case is damaged, turn off the power • Product failure, an electric shock or fire may result from a damaged and disconnect the power cord. Then contact Samsung Customer Service cable. Center. - Page 10 • Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered the product. Then contact Samsung Customer Service Center. • Product failure, an electric shock or fire may result. Do not put power adapters together.
- Page 11 Do not put the power adapter near to any heating apparatus. Rest your eyes for more than 5 minutes for every 1 hour of product use. • Otherwise, a fire may result. • Eye fatigue will be relieved. Keep the power adapter in a well-ventilated area. Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.
-
Page 12: Correct Posture To Use The Product
Correct posture to use the product Use the product in the correct posture as follows: • Straighten your back. • Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. Keep your eyes directly in front of the screen. •... -
Page 13: Preparations
Chapter 02 Preparations Checking the Components Components - Contact the vendor where you purchased the product if any components are missing. ― Components may vary depending on the country. - The appearance of the components may differ from the images shown. - The optimal resolution may not be available when using a non-high speed HDMI or HDMI-DVI cable. -
Page 14: Parts
OSD control is locked.) Press to enable or disable Night View Mode. The items below are not available if the Night View Mode function is enable. Picture SAMSUNG Bright, Brightness, Eye Saver Mode, Game Mode • MAGIC System Eco Saving Plus •... - Page 15 Icons Description Turn the screen on or off. When a control button on the product is pressed, the Function Key Guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.) To access the onscreen menu when the guide is displayed, press the corresponding button again.
-
Page 16: Reverse Side
Reverse Side ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Description Connects to the power adapter. Connects to a source device using an HDMI cable or HDMI-DVI cable. Connect to a PC using the D-SUB cable. -
Page 17: Installation
Installation Attaching the Stand ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. Insert the stand neck into the stand base in the Place a soft cloth over the table to protect the product direction shown in the figure. -
Page 18: Removing The Stand
Removing the Stand ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. Place a soft cloth over the table to protect the product Turn the connecting screw at the bottom of the stand and place the product onto the cloth so that the front of base to separate it. -
Page 19: Adjusting The Product Tilt
Adjusting the Product Tilt ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. • You can adjust the tilt of your monitor. • Hold the lower part of the product and adjust the tilt carefully. -
Page 20: Anti-Theft Lock
Anti-theft Lock ― An anti-theft lock allows you to use the product securely even in public places. ― The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. To lock an anti-theft locking device: Fix the cable of your anti-theft locking device to a heavy object such as a desk. -
Page 21: Connecting And Using A Source Device
Chapter 03 Connecting and Using a Source Device Before Connecting Connecting and Using a PC Check the following before you connect this product with other devices. Select a connection method suitable for your PC. ― Connecting parts may differ in different products. Pre-connection Checkpoints Connection Using the D-SUB Cable ―... -
Page 22: Connection Using The Hdmi Cable
Connection Using the HDMI Cable Connection Using an HDMI-DVI Cable ― Do not connect the power cable before connecting all other cables. ― Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. Ensure you connect a source device first before connecting the power cable. -
Page 23: Connecting The Power
Connecting the Power Power connection using detachable power adapter • Connect the power cable to the power adapter. Then, connect the power adapter to the DC 14V port on the back of the product. Next, connect the power cable to the power outlet. DC 14V ―... -
Page 24: Driver Installation
― To install the latest version of the product driver, download it from the Samsung Electronics website Select a language on the product and change the resolution on your PC to the optimum setting. -
Page 25: Screen Setup
A detailed description of each function is provided. Refer to your product for details. SAMSUNG MAGIC Bright Configuring SAMSUNG MAGIC Bright Press any button on the front of the product to display the Key guide. Next, press MENU to display the corresponding This menu provides an optimum picture quality suitable for the environment menu screen. - Page 26 When the external input is connected through HDMI and PC/AV Mode is set to AV, Bright has four automatic picture SAMSUNG MAGIC settings (Dynamic, Standard, Movie and Custom) that are preset at the factory. You can activate either Dynamic, Standard, Movie or Custom.
-
Page 27: Brightness
You can adjust the general brightness of the picture. (Range: 0~100) menu screen. A higher value will make the picture appear brighter. ― This menu is not available when Bright Dynamic Contrast SAMSUNG is set to Press to move to Picture and press on the product. -
Page 28: Contrast
Adjust the contrast between the objects and background. (Range: 0~100) menu screen. A higher value will increase the contrast to make the object appear clearer. ― This option is not available when Bright Cinema Dynamic SAMSUNG is in Press to move to Picture and press on the product. -
Page 29: Sharpness
Make the outline of objects more clear or blurry. (Range: 0~100) menu screen. A higher value will make the outline of objects clearer. ― This option is not available when Bright Cinema Dynamic SAMSUNG is in Press to move to Picture and press on the product. -
Page 30: Color
A detailed description of each function is provided. Refer to your product for menu screen. details. ― Adjust the tint of the screen. This menu is not available when Bright is set SAMSUNG MAGIC Press to move to Picture and press on the product. -
Page 31: Samsung Magic Upscale
SAMSUNG MAGIC Upscale Configuring SAMSUNG MAGIC Upscale Press any button on the front of the product to display the Key guide. Next, press MENU to display the corresponding Upscale function can enhance the layers of the picture details and the... -
Page 32: Hdmi Black Level
• Normal: Select this mode when there is no contrast ratio degradation. Picture Optimize HDMI • Low: Select this mode to reduce the black level and increase the white level when there is a contrast ratio degradation. picture brightness SAMSUNG MAGIC Bright Custom and contrast by Press... -
Page 33: Eye Saver Mode
Eye Saver Mode Configuring Eye Saver Mode Press any button on the front of the product to display the Key guide. Next, press MENU to display the corresponding Set to an optimum picture quality suitable for eye relaxation. menu screen. TÜV Rheinland “Low Blue Light Content”... -
Page 34: Game Mode
Game Mode Configuring Game Mode Press any button on the front of the product to display the Key guide. Next, press MENU to display the corresponding Configure the product screen settings for game mode. menu screen. Use this feature when playing games on a PC or when a game console such as PlayStation™... -
Page 35: Picture Size
Picture Size Changing the Picture Size Press any button on the front of the product to display the Key guide. Next, press MENU to display the corresponding Change the picture size. menu screen. mode Press to move to Picture and press on the product. - Page 36 mode mode • 4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts. Picture Choose the size and • 16:9: Display the picture with an aspect ratio of 16:9. aspect ratio of the Eye Saver Mode Screen Fit: Display the picture with the original aspect ratio without cutting off.
-
Page 37: Screen Adjustment
Screen Adjustment Configuring H-Position & V-Position H-Position: Move the screen to the left or right. ― This menu is available in Analog mode only. V-Position: Move the screen up or down. ― This menu is only available when Picture Size is set to Screen Fit Mode. -
Page 38: Configuring Coarse
Configuring Coarse Adjust the screen frequency. ― This menu is available in Analog mode only. Press any button on the front of the product to display the Key guide. Next, press MENU to display the corresponding Screen Adjustment menu screen. Adjust the screen frequency. -
Page 39: Configuring Fine
Configuring Fine Fine-adjust the screen to obtain a vivid picture. ― This menu is available in Analog mode only. Press any button on the front of the product to display the Key guide. Next, press MENU to display the corresponding Screen Adjustment menu screen. -
Page 40: Coordinating Osd
Chapter 05 Coordinating OSD A detailed description of each function is provided. Refer to your product for details. Transparency Changing Transparency Press any button on the front of the product to display the Key guide. Next, press MENU to display the corresponding Set the transparency for the menu windows. -
Page 41: Position
Position Configuring Position H-Position: Move the menu position to the left or right. V-Position: Move the menu position up or down. Position Move the menu Press any button on the front of the product to display the Key guide. Next, press MENU to display the corresponding position to the left H-Position or right. -
Page 42: Language
Language Configuring Language Press any button on the front of the product to display the Key guide. Next, press MENU to display the corresponding Set the menu language. menu screen. ― A change to the language setting will only be applied to the onscreen menu display. -
Page 43: Display Time
Display Time Configuring Display Time Press any button on the front of the product to display the Key guide. Next, press MENU to display the corresponding Set the on-screen display (OSD) menu to automatically disappear if the menu is menu screen. not used for a specified period of time. -
Page 44: Setup And Reset
Chapter 06 Setup and Reset A detailed description of each function is provided. Refer to your product for details. Night View Setting Configuring Night View Setting Press any button on the front of the product to display the Key guide. Next, press MENU to display the corresponding Night View Mode function set to an optinum usability in dark environment menu screen. - Page 45 Press to move to Screen Light and press on the product. Night View Setting Night View Mode: to adjust the luminance of Screen by change the value of Screen. Press Screen Light Press to adjust the luminance of LED by change the value of Light. •...
- Page 46 In order to achieve the best effect of LED lighting, please place the keyboard in optimum position as the following: Position 1 Position 2 Position 3 50 mm 200 mm Position 1 • Place the Keyboard flatly, then the angle of the Keyboard is 0° •...
-
Page 47: Eco Saving Plus
― This option is not available when Bright is in Dynamic Contrast mode. SAMSUNG MAGIC Press to move to System and press on the product. ― This menu is not available when Game Mode is enabled. -
Page 48: Off Timer
Off Timer Configuring Off Timer Press any button on the front of the product to display the Key guide. Next, press MENU to display the corresponding You can set the product to automatically turn off. menu screen. System Enable or disable Press to move to System... -
Page 49: Configuring Turn Off After
Configuring Turn Off After Off Timer Set the monitor to automatically turn Off Timer ― This option is only available when Off Timer is set to On. off after a certain Turn Off After time period. Press any button on the front of the product to display the Key guide. Next, press MENU to display the corresponding menu screen. -
Page 50: Pc/Av Mode
PC/AV Mode ― This function does not support Analog mode. ― Supplied for the wide models only such as 16:9 or 16:10. ― If the monitor (when set to HDMI) is in power saving mode or is displaying the message Check Signal Cable, press the PC/AV Mode... -
Page 51: Source Detection
Source Detection Configuring Source Detection Press any button on the front of the product to display the Key guide. Next, press MENU to display the corresponding You can activate Source Detection. menu screen. System Decide how input Press to move to System and press on the product. -
Page 52: Key Repeat Time
Key Repeat Time Configuring Key Repeat Time Press any button on the front of the product to display the Key guide. Next, press MENU to display the corresponding Control the response rate of a button when the button is pressed. menu screen. -
Page 53: Reset All
Reset All Initializing Settings (Reset All) Press any button on the front of the product to display the Key guide. Next, press MENU to display the corresponding Return all the settings for the product to the default factory settings. menu screen. Press to move to System... -
Page 54: Information Menu And Others
Chapter 07 Information Menu and Others A detailed description of each function is provided. Refer to your product for details. Information Displaying Information View the current input source, frequency and resolution. Information Press any button on the front of the product to display the Key guide. Next, press MENU to display the corresponding Picture menu screen. -
Page 55: Configuring Brightness, Contrast And Sharpness From The Initial Screen
Brightness ― This menu is not available when Bright Dynamic Contrast is set to mode. SAMSUNG MAGIC and Sharpness from the Initial ― This menu is not available when Eco Saving Plus is enabled. ― This menu is not available when... -
Page 56: Installing The Software
• Windows XP 32Bit/64Bit Installing the Software • Windows Vista 32Bit/64Bit • Windows 7 32Bit/64Bit To install the latest version of Easy Setting Box, download it from the Samsung Electronics website • Windows 8 32Bit/64Bit at http://www.samsung.com. • Windows 8.1 32Bit/64Bit Select the Easy Setting Box setup program. -
Page 57: Troubleshooting Guide
Chapter 09 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Check if your product is operating normally by using the product test function. -
Page 58: Check The Following
Check the following. Installation issue (PC mode) Issues Solutions The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked. Blank spaces are found on all four sides of the screen when The blank spaces found on the screen have nothing to do with the product. - Page 59 Issues Solutions The screen is not clear. The screen is blurry. Adjust Coarse and Fine. Remove any accessories (video extension cable, etc.) and try again. Set the resolution and frequency to the recommended level. The screen appears unstable and shaky. Check that the resolution and frequency for the PC are within the range of resolution and frequency compatible with the product.
- Page 60 Source device issue Issues Solutions A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, have your PC serviced. ― The LED lights on the frame of the product may be seen depending on the user's viewing angle. The light is harmless to people and has no bearing on product features and performance.
-
Page 61: Q & A
Q & A Question Answer Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the frequency? Set the frequency on your graphics card. • Windows XP: Go to Control Panel Appearance and Themes Display Settings... - Page 62 Question Answer How do I set power-saving mode? • Windows XP: Set power-saving mode in Control Panel Appearance and Themes Display Screen Saver Settings Power options or BIOS SETUP on the PC. • Windows ME/2000: Set power-saving mode in Control Panel Display Screen Saver Settings...
-
Page 63: Specifications
Chapter 10 Specifications General Size Model Name S22F380HY Panel Size 54.6 cm Display area 476.64 mm (H) x 268.11 mm (V) Display area Pixel Pitch 0.24825 mm (H) x 0.24825 mm (V) Dimensions (W x H x D) / Without Stand 511.6 x 320.1 x 70.0 mm... - Page 64 ― Plug-and-Play This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if desired. ―...
-
Page 65: Powersaver
PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Power- saving mode only functions when the product is connected to a PC with a power-saving function. -
Page 66: Standard Signal Mode Table
Standard Signal Mode Table Model Name S22F380HY - This product can be set to only one resolution for each screen size to obtain Synchronization Horizontal Frequency 30 – 81 kHz the optimum picture quality due to the Vertical Frequency 56 – 75 Hz nature of the panel. - Page 67 Resolution Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity (kHz) (Hz) (MHz) (H/V) VESA, 800 x 600 - Horizontal Frequency 46.875 75.000 49.500 The time required to scan a single line from the left to the right side of the VESA, 1024 x 768 48.363 60.004...
-
Page 68: Appendix
― When the service is requested, in spite of in warranty, we may charge you for a visit from a service • Use of supplies or separatly sold product unspecified by Samsung. technician in the following cases. • Repair from a person besides an engineer of outsourcing service company or partner of Samsung Electronics Co., Ltd. Not a product defect •... -
Page 69: Correct Disposal
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. (For India Only) This product is RoHS compliant. For more information on safe disposal and recycling visit our website www.samsung.com/in or contact our Helpline numbers - 18002668282, 180030008282. -
Page 70: Terminology
Terminology OSD (On Screen Display)____ On Grey scale____ Scale refers to levels Dot Pitch____ The product and screen Vertical Frequency____ One image is Plug & Play____ The Plug & Play screen display (OSD) allows you to of color intensity that show variations consist of red, green and blue dots.
Need help?
Do you have a question about the S22F380HY and is the answer not in the manual?
Questions and answers