How To Install And Remove Parts; How To Use Control Panel - Hitachi R-S38KPTH Instruction Manual

How to Install and Remove parts

Adjusting the shelves
Pull up the back and pull out the shelf forward.
Set the refrigerator shelves by combining
with stored food.
Fresh Room
Remove the "Fresh Room" as shown below.
Do not store more than 4.9 kg in the
"Fresh Room" or it may be broken.
Lower Freezer Case
Lower Freezer Case is for large-sized food and those that
need to be stored over an extended time period.
Make sure food is stored below in the indication line.
Otherwise food touches the slide case cbove and it prevents
the door to be closed properly and cooling efficiency suffers.
Food and the slide case may be also damaged.
Slide Case
(Front)
Indication line for the
food storage section Lower Freezer Case

How to use control panel

Caution
1. Pull out the lower freezer compartment door,
and pull up toward you.
2. To remove slide case, lift it up as shown.
Do not Store more than 8.0 kg in upper
freezer case or it may be broken.
Please close the door of the refrigerator door before changing the setting.
Display area
For operation
Remove the door pocket as shown
Pull out the vegetable compartment door, and lift up slide
case and vegetable case as shown.***
Do not store more than 4.5 kg in the slide case
or it may be broken.
Vegetable Case
*** If R-door open, can't pull out the Vegetable-case.
Freezer Compartment
3. To remove lower freezer case, lift it up as shown.
Do not store more than 10.5 kg in the
lower freezer case or it may be broken.
Slide case
Setting QUICK MODE mode
Set a cooling mode
Cooling
6
Freezing
6
Adjusting temperature settings
Set temperature for each
Normally, use the "Mid" setting
Refrigerator
8
Freezer Compartmant
8
Door Pocket / Egg Pocket
Tap! Tap!
Tap! Tap!
Vegetable Compartment
Slide Case
Do not store more than 12 kg
in the vegetable case or it
may be broken.
Lower Freezer Case
Setting ENERGY SAVING mode
Set energy saving mode
Setting an iec-maker
Set the ice making mode
On 9
7
Empty
6
5