SOund & lAnguAgE COntROl
nICAm Reception
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received.
NICAM
➊
When
NICAM
➋
When
If the stereo signal is weak, switch to
NICAM dual
➌
When
MONO
.
Speaker Sound Output Selection
In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.
Select the sound output.
L+R
Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio R input is sent to the
right loudspeaker.
L+L
Audio signal from audio L input is sent to left and right loudspeakers.
R+R
Audio signal from audio R input is sent to left and right loudspeakers.
GB-0
(In Analogue Antenna mode Only -
mono is received, you can select
stereo is received, you can select
FM MONO
is received, you can select
NICAM MONO
FM MONO
or
NICAM STEREO
FM MONO
or
.
NICAM DUAL I
NICAM DUAL II
,
tV)
.
.
NICAM DUAL I+II
FM
or
or