Turning On The Tv; Programme Selection; Volume Adjustment - LG 37LF7700 Owner's Manual

WAtChIng tV / PROgRAmmE COntROl

tuRnIng On thE tV

- When your TV is turned on, you will be able to use its features.
➊ Firstly, connect the power cord pushing it firmly home and check the main power on the TV.
At this stage, the TV switches to standby mode. (The power indicator on the TV illuminates red.)
➋ In standby mode to turn TV on, press the
POWER
,
Initial Setting
This function guides the user to easily set the optimal viewing mode and tune the available channels. When
you turn the TV on for the first time after purchase or performing the
function will begin automatically.
<Mode Setting>
Select the mode for your environment. Each mode provides the optimal picture settings for each
■
environment.
Select
■
Select
■
automatically reset to initial settings after a certain period of time.
The mode (Home Use, Store Demo) can be changed in the
■
<Select Tuning>
Select one of the three tuning modes Freesat & Antenna, Freesat or Antenna.
■
■ After the Freesat signal is detected, enter your full postcode (including any spaces e.g. TW19 7RP).
The Freesat service uses Astra 2 at 28.2° East, and Eurobird 1 at 28.5° East satellites.
■
If new software is detected and installed, you can use the initial setting again.
■
<Auto Tuning>
First tunes the Freesat programmes, then Digital and analogue terrestrial programmes.
■
Note:
a. If you close without completing the initial setting, the Initial Setting menu can be displayed again.
b. Press the RETURN button to return to the previous screen.
c. For those countries without confirmed DTV broadcasting standards, some DTV features might not work,
depending on the DTV broadcasting environment.

PROgRAmmE SElECtIOn

➊ Press the

VOlumE AdjuStmEnt

➋ Press the
If you wish to switch the sound off, press the
You can cancel this function by pressing the
GB-30
INPUT P NUMBER
, or button on the remote control and the TV will switch on.
∧∨
"Home Use"
to use the TV in home.
"Store Demo"
to use the TV in store. Even if the user changes the picture setting, the TV will
P
(Programme Up/Down) or
∧∨
+ -
or button to adjust the volume.
INPUT P
or (Programme Up/Down) button on the TV or press the
∧∨
OPTION > Factory Reset
OPTION > Mode Setting
NUMBER
buttons to select a programme number.
MUTE
button.
MUTE + - AV MODE
, , or
, this
menu.
button.