1
Identify components
1. SOZOsupport Stand
2. SOZOtouch
3. Handplate
4. SOZOstep
5. Footplate
6. Power Adaptor
7. SOZOconnect Cable
8. SOZOcradle
9. Tablet including the SOZO application
10. Screws and hex key for stand
Screw the footplate (5) into
3
the base of the SOZOsupport
Stand (1).
*NOTE:
It is recommended that two
people take part in assembling the
stand in order to make the process
quicker, easier and safer.
Have one person hold the stand with
the base upward. Have the second
person hold the footplate on the stand
while the first person attaches the
plate using the hex key (10).
Screw the handplate (3) into
4
the top of the SOZOsupport
Stand (1).
a.
Place the handplate on the top of
the SOZOsupport Stand with the
mounting screws facing up.
b.
Using the hex key (10), attach the
handplate with the remaining
screws provided.
*NOTE:
Once both plates are connected to the
SOZOsupport Stand, the large drop hole should
be near the top opposite of the blue stripe as
shown in top graphic of step 4.
LBL-503-US Rev F
SOZO
(1)
BOTTOM VIEW
Bottom Plate
Blue Insert (Front)
.......................................................
TOP
Front View
QUICK START GUIDE
®
(2)
(6)
(3)
(7)
(4)
(8)
(9)
(5)
(10)
x4
Lace the SOZOconnect
5
cable (7) through the
SOZOsupport Stand (1).
Feed the SOZOconnect cable
through the droplet hole on the
back of the stand and out the front
hole at the base of the stand.
.............................................................
Bottom Front View
*NOTE:
The connector cable port is
identical on both the hand plate and
foot plate.
2
Identifying
which end is
the top of the
pedestal
Blue
Insert
(Front)
TOP
Rear View
Copyright © 2020 for ImpediMed
®