Operation; Key Feature - Future Call FC-0613 User Manual

OPERATION

KEY FEATURE

Last Number Redial / Pause
Your PHONE remembers the last number dialed. If the number you dial is busy or
not being answered, hang up. To redial the last number automatically, press the
REDIAL button. NOTE: You can redial the same telephone number as many times
as required. However, once you dial another number, the previous number is
erased. This key is also used as a pause key when programming this phone
on a PBX system. E.G... "9" before the number
Ringer Switch OFF / LO / HI
Your phone provides a ringer adjustment of High, Low and Off, when you don't
want to be disturbed, slide the switch to the off position. Now you can still make a
outgoing calls without being disturbed by incoming calls.
Handset Receiver Volume Switch VHI / HI / MED
This switch may be used to adjust the handset volume of received speech.
VHI = Very High – HI = High and MED = Normal
Store ON – OFF Switch
This switch is used to prevent storing of number by mistake, This switch needs to
be ON to be able to store memory numbers
NORMAL – ONE TOUCH SWITCH
This switch is used to switch between Normal and One touch dialing
FLASH KEY
This key is for getting a new line if you make a mistake when dialing or it is also
used to answer a call waiting call...
MUTE KEY
This key is used to mute the handset mic when you are talking you need to hold it
down when you want to mute the mic on the handset.
STORE KEY
This key is used when storing numbers into the memory