Download
Share
Print this page
Future Call FC-1125 ES1 User Manual
  1. Manuals
  2. Brands
  3. Future Call Manuals
  4. Telephone
  5. FC-1125 ES1
  6. User manual

Future Call FC-1125 ES1 User Manual

Big button phone with remote controller and help function caller id and one touch dialing
Hide thumbs

Advertisement

Quick Links

Download this manual
Function
BIG BUTTON PHONE WITH REMOTE
CONTROLLER AND HELP FUNCTION
CALLER ID AND ONE TOUCH DIALING
MODEL: FC-1125
Version No.: FC-1125 ES1
USER MANUAL
 Please follow instructions for repairing if any otherwise do not
alter or repair any parts of device except specified.
IMPORTANT SAFETY INSTRUCTIONS
Before using your telephone equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock and injury to persons including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do
not use liquid or Aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water, for example, near a bath
tub, wash bowl, kitchen sink, or laundry tub, in a wet basement
or near a swimming pool.
5. Do not place this product on an unstable cart, stand, or table.
The product may fall causing serious damage to the product.
6. Slots and openings in the enclosure and the back and bottom
are provided for ventilation, to protect it from overheating.
These openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should never be
placed near or over a radiator or heat register. This product
should not be placed in a built-in installation unless proper

Advertisement

loading
Need help?

Need help?

Do you have a question about the FC-1125 ES1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Future Call FC-1125 ES1

Summary of Contents for Future Call FC-1125 ES1

  • Page 1 This product should never be MODEL: FC-1125 placed near or over a radiator or heat register. This product Version No.: FC-1125 ES1 should not be placed in a built-in installation unless proper...
  • Page 2 ventilation is provided. C. If the product has been exposed to rain or water. 7. This product should be operated only from the type of power D. If the product does not operate normally by following the source indicated on the marking label. If you are not sure of the operating instructions.
  • Page 3 Handset Vol+ LCD Dsiplay Redial/Pause Set Key Callback 911 Key Speaker M1/M2/M3 Memory Help Record Key Keys Cancel/ Record Key In-Use Lamp LOW BATT Key SOS Key Dialing Keys of 0-9, Out key *, # Delete/Flash Ringer Volume Switch Down DC9V Jack Up/Sync Parallel Phone Port...

  • Page 4: Installation

    INSTALLATION Coil Cord Connection Insert coil cord into modular jack located on left hand side housing. Connect the other end into the modular jack located on handset. Sketch Map for Replacing Battery of Remote Controller Loosen the screw, open Line Cord Connection the rear cover and Insert the modular plug of the straight cord into the rear replace it.
  • Page 5 At on-hook state, press [SET] key, it will show “-12345-” Make a Call on LCD display, then press number 1, the LCD will show You can pick up the handset or push SPEAKER key then the blinking YEAR. Then press [UP/SYNC] and [DOWN] dial the number you want using the (0-9) key, or you can key to adjust it.
  • Page 6 of OAC, the LCD will show “OCODE-”. Press [UP/SYNC] [UP/SYNC] Key and [DOWN] Key and [DOWN] key to set the number of OAC. After the Press [UP/SYNC] and [DOWN] key to view the CID setting is finished, press [SET] key to confirm. numbers in sequence.
  • Page 7 [VOL+] Key and [VOL-] Key See the Sketch Map for Replacing Battery of Remote At the communication state, press these two keys to adjust Controller. After you press this key, the failure prompt is removed. the handset or speakerphone volume among 4 steps. Set M (Memory) Key [911] Key 1) Set or Change M Key:...
  • Page 8 second SOS number, directly press [SET] key to confirm Push-down Help Function and skip over. Lift the handset or press [SPEAKER] key for x seconds Notes: (depended on the customer’s demand) without any dial 1. If there is a false trigger alarm, the alarm for help can operation, the SOS key lamp blinks and the phone be revoked by pressing [CANCEL/RECORD] key, generates the alarm, then automatically dials the emergency...

  • Page 9: Consumer Information

    Call Answering Function via Remote Controller CONSUMER INFORMATION This equipment complies with Part 68 of the FCC rules and the When there is an incoming call, press the red [SOS] key on requirements adopted by the ACTA On the bottom of this remote controller, the phone will automatically off-hook in equipment is a label that contains, among other information, a the handsfree mode and begin the handsfree conversation.
  • Page 10 FCC certification may The telephone company may make changes in its facilities, be voided. Should you encounter any problems, please call the FUTURE CALL LLC. equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone...

  • Page 11: Limited Warranty And Service

    HOTLINE & E-MAIL AT: 1-888-934-CALL & help@future-call.com LIMITED WARRANTY AND SERVICE FUTURE CALL LLC. warrants this product to be free from defective materials or factory workmanship and will replace or repair this unit or any part thereof, except batteries, if it...