Updating The Bios - Asus K50AB Hardware User Manual

Software Problem - BIOS

Updating the BIOS.

1. Please verify the Notebook PC's exact model and download the latest BIOS file for your model
from the ASUS website and save it in your flash disk drive.
2. Connect your flash disk drive to the Notebook PC and power on the Notebook PC.
3. Use the "Easy Flash" function on the Advanced page of the BIOS Setup Utility. Follow the in-
structions shown.
Main Advanced Security Power Boot Exit
Advanced Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
IDE Configuration
Start Easy Flash Flash
Internal Pointing Device
Internal Numeric Pad Lock
Play POST Sound
Speaker Volume
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
4. Locate the latest BIOS file and start updating (flashing) the BIOS.
AsusTek BIOS ROM Easy Flash Utility V1.15
FLASH TYPE: MXIC MX25L8005
Current ROM
PLATFORM: K50IJ
VER: 104T02
DATE: 03/11/09
PATH: A:\
Drive File
A:
Note
<Up/Dn> to move ,<Enter> to determine ,<BSpace> to drive select
5. You must "Load Setup Defaults" on the Exit page after updating (flashing) the BIOS.
BIOS SETUP UTILITY
Start Easy Flash Utility?
[Enabled]
[Enabled]
[OK] [Cancel]
[Yes]
[4]
Update ROM
PLATFORM: Unknown
VER: Unknown
DATE: Unknown
Press ENTER to run
the utility to select
and update BIOS.
Press Hotkey F4 at
POST to invoke the
Utility. This
utility doesn't
support :
1. CDROM
2. USB HDD
3. Secondary HDD
Select Screen
Select Item
+-
Change Field
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
A
Appendix
A-11