Panasonic KX-HDV800 Installation & Administration Manual page 41

PROVISIONING – UPGRADE AND CONFIGURATION
<password>
<eap_tls>
<enable>
<password>
<qos>
<dscp_sip>
<dscp_media>
<time>
<ntp>
<timezone>
<daylight_save>
<ntps>
<sip>
<udp_transport>
<udp_port>
<tcp_transport>
<tcp_port>
<tls_transport>
<sips_transport>
<tls_port>
<use_stun>
<stun_domain />
<stun_host />
<use_turn>
<turn_host />
<turn_tcp>
<turn_user />
<turn_passwd />
<nat_type_in_sdp>
Specify if UDP shall be used as transport.
Specify the UDP port to listen to.
Specify if TCP shall be used as transport.
Specify the TCP port to listen to.
Specify if TLS shall be used as transport.
Specify if SIPS shall be used as transport.
Specify the TLS port to listen to.
count.
Use Simple Traversal of UDP through NATs (STUN) for NAT traversal.
Default is no.
Specify domain name to be resolved with DNS SRV resolution to get
the address of the STUN servers. Alternatively application may specify
stun_host and stun_relay_host instead.
Specify STUN server to be used in "HOST[:PORT]" format. If port is not
Use Traversal Using Relay NAT (TURN) for NAT traversal. Default is no.
Specify TURN relay server to be used.
Use TCP connection to TURN server. Default is false.
TURN username.
TURN password.
Support for adding and parsing NAT type in the SDP to assist trouble-
shooting. The valid values are:
0: no information will be added in SDP and parsing is disabled
1: only the NAT type number is added
2: add both NAT type number and name
41
-