Table of Contents
Advertisement
Setting
Auto Power On
Sleep Mode
Sleep Mode Timer
A/V Mute Timer
Lens Cover Timer
Standby Mode
Port
Options
HDMI1
Computer1
USB Display
Off
On
Off
1 to 30 minutes
On
Off
On
Off
Communication On
Communication Off
Wired LAN
Wireless LAN
187
Description
Selects whether to automatically
turn on the projector when you
connect an input signal to a
specific input source
Automatically turns off the
projector after an interval of
inactivity
Sets the time before the projector
automatically turns off (Sleep
Mode must be turned on)
Automatically turns off the
projector after 30 minutes of
inactivity
Automatically turns off the
projector after 30 minutes if the
lens cover is closed.
Enable this setting to allow
monitoring and control of the
projector over a network when
the projector is in standby mode
(setting is displayed only when
A/V Output is set to While
Projecting)
Selects the port to use while the
Standby Mode setting is set to
Communication On
Advertisement
Table of Contents
