Kenwood KMC-41D Service Manual

SPEAKER MICROPHONE
KMC-41D
SERVICE MANUAL
Lever (PTT)
(D10-0654-18)
Plastic cabinet assy
(A02-4050-08)
Cord with plug
(E30-7657-08)
Document Copyrights
Copyright 2014 by JVC KENWOOD Corporation. All
rights reserved.
No part of this manual may be reproduced, translated,
distributed, or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording, or other-
wise, for any purpose without the prior written permission of
JVC KENWOOD Corporation.
Disclaimer
While every precaution has been taken in the preparation
of this manual, JVC KENWOOD Corporation assumes no
responsibility for errors or omissions. Neither is any liability
assumed for damages resulting from the use of the informa-
tion contained herein. JVC KENWOOD Corporation reserves
the right to make changes to any products herein at any time
for improvement purposes.
T
his product complies with the RoHS directive for the European market.
© 2014-2 PRINTED IN JA PAN
RQ023 (K) B5B-7119-00
Dressed screw (Universal)
(N08-0566-08)
SPECIFICATIONS
Microphone
Impedance .................................................... 2.2k (MAX)
Sensitivity ........................................–65dB ± 4dB at 1kHz
Speaker
Impedance . ..........................................16 ±15% at 1kHz
Rating input .............................................................. 0.5W
Maximum input ......................................................... 1.5W
Dimensions (W x H x D)
............... 67.8 x 91.5 x 43.3 mm (2.67 x 3.60 x 1.70 in)
Weight ................................................. Approx. 260g/9.2oz
This product uses Lead Free solder
.