Arrow AL400AC Instructions And Warnings For Installation, Use And Maintenance page 15

ENGLISH
- Raise the protection cover of the lock (fig. 2).
- Put the key into the lock and rotate it clockwise of 90°; now the
wing is released and can be manually moved (fig. 3).
- To hook again the wing, put the key into and rotate it
counterclockwise of 90°.
FIG. 2
Positioning of actuator
- Manually unblock the actuator.
- Raise the actuator and put the pin of female screw support into the
hole on the front stirrup as shown in the following figure 4.
FIG. 4
- 14 -
FIG. 3