Operation - Craftsman CMEHTS822 Instruction Manual

Fig. B
Fig. C
Fig. D
Attaching Extension Cord to Trimmer
(Fig. A, E)
1. An extension cord retainer
handle that prevents the tool from coming unplugged.
2. To use this feature, double the extension cord about
8" (203 mm) from the end, and insert it into the slot in
the back of the handle area. Hook the loop formed by
doubling the cord, over the cord retainer tab, as shown
in Figure E. Gently tug on the cord to insure that it is
firmly retained in the trimmer's housing.
3. Plug the receptacle end of the extension cord into the
plug blades in the trimmer.
is built into the switch
7
Fig. E
To Turn the Tool ON (Fig. F)

WARNING:
switch in the ON position.

CAUTION:
greater than 3/4" (19 mm). Use the trimmer only
for cutting normal shrubbery around houses and
buildings. NOTE: sawBLADE™ can cut stems and
branches up to 1.5" (38.1 mm).
To turn the tool "ON", slide the lock off button
Figure F, backward and, squeeze the trigger switch
the unit is running, you may release the lock off button.
In order to keep the unit running you must continue
to squeeze the trigger. To turn the tool "OFF", release
the trigger.
Fig. F
4
5

OPERATION


WARNING:
serious personal injury, turn unit off and
disconnect it from power source before making
any adjustments or removing/installing
attachments or accessories. An accidental start-up
can cause injury.
English
7
Never attempt to lock a
Do not use blade to cut stems
, shown in
4
. Once
5
To reduce the risk of
5