Chipset - Gigabyte B450 AORUS ELITE V2 User Manual

2-7

Chipset

& IOMMU
Enables or disables AMD IOMMU support. (Default: Auto)
& Integrated Graphics
(Note)
Enables or disables the onboard graphics function.
The BIOS will automatically enable or disable the onboard graphics depending on the
Auto
graphics card being installed. (Default)
Enables the onboard graphics.
Forces
Disabled Disables the onboard graphics.
& UMA Mode
(Note)
Specify the UMA mode.
Auto Lets the BIOS automatically configure this setting. (Default)
UMA Specified Sets the UMA Frame Buffer Size.
UMA Auto Sets the display resolution.
This item is configurable only when Integrated Graphics is set to Force.
& UMA Frame Buffer Size
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller.
MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 64M~16G.
This item is configurable only when UMA Mode is set to UMA Specified.
& Display Resolution
(Note)
Allows you to set the display resolution. Options are: Auto (default), 1920x1080 and below, 2560x1600,
3840x2160. This item is configurable only when UMA Mode is set to UMA Auto.
& SATA Mode
Enables or disables RAID for the integrated SATA controllers or configures the SATA controllers to AHCI
mode.
RAID Enables RAID for the SATA controller.
AHCI C onfigures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
(Note) This item is present only when you install a CPU that supports this feature.
(Note)
- 35 -