Installing An Expansion Card; Back Panel Connectors - Gigabyte B450 AORUS ELITE V2 User Manual

Hide thumbs Also See for B450 AORUS ELITE V2:
Table of Contents

Advertisement

Dual Channel Memory Configurations Table
DDR4_4
2 Modules
- -
DS/SS
4 Modules
DS/SS
(SS=Single-Sided, DS=Double-Sided, "- -"=No Memory)
Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.
1.
Dual Channel mode cannot be enabled if only one memory module is installed.
2.
When enabling Dual Channel mode with two or four memory modules, it is recommended that memory
of the same capacity, brand, speed, and chips be used. For optimum performance, when enabling
Dual Channel mode with two memory modules, we recommend that you install them in the DDR4_1
and DDR4_2 sockets.
1-5

Installing an Expansion Card

Read the following guidelines before you begin to install an expansion card:
• Make sure the motherboard supports the expansion card. Carefully read the manual that came
with your expansion card.
• Always turn off the computer and unplug the power cord from the power outlet before installing an
expansion card to prevent hardware damage.
1-6

Back Panel Connectors

USB 2.0/1.1 Port
The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices.
PS/2 Keyboard/Mouse Port
Use this port to connect a PS/2 mouse or keyboard.
DVI-D Port
(Note 1)
The DVI-D port conforms to the DVI-D specification and supports a maximum resolution of 1920x1200@60 Hz
(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports DVI-D
connection to this port.
HDMI Port
output. You can use this port to connect your HDMI-supported monitor. The maximum supported resolution
is 4096x2160@60 Hz
(Note 2)
After installing the HDMI device, make sure to set the default sound playback device to HDMI. (The
item name may differ depending on your operating system.)
USB 3.1 Gen 1 Port
The USB 3.1 Gen 1 port supports the USB 3.1 Gen 1 specification and is compatible to the USB 2.0
specification. Use this port for USB devices.
(Note 1) The DVI-D port does not support D-Sub connection by adapter.
(Note 2) Actual support may vary by CPU.
DDR4_2
DDR4_3
DDR4_1
DS/SS
- -
DS/SS
- -
DS/SS
- -
DS/SS
DS/SS
DS/SS
The HDMI port supports HDCP 2.2
Audio formats. It also supports up to 192KHz/24bit 7.1-channel LPCM audio
, but the actual resolutions supported are dependent on the monitor being used.
- 10 -
and Dolby TrueHD and DTS HD Master
(Note 2)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents