Maintenance - Stanley PW6655 Manual

5.5hp 2500psi pressure washer
Table of Contents

Advertisement

MAINTENANCE INFORMATION
If scheduled maintenance is NOT carried out then this will void
your warranty. Use the Service Log on page 23 to keep track of
the regular servicing. Ensure that the authorised service agent
has dated, signed and stamped this log to ensure your warranty
is not void.
Fuel Tank Filter, Pic 19
The fuel tank filter should be checked every time you fill up
the fuel tank. If dirty, replace. Your fuel tank filter should be
replaced every 50 hours (operation) or every 3 months, which
ever occurs first or whenever considered necessary.
To check or replace the fuel tank filter;
1. Remove the fuel tank cap.
2. Remove the fuel tank filter.
3. If dirty replace fuel tank filter before using the pressure
washer.
4. Push new fuel tank filter into the top of the fuel tank.
5. Replace the fuel tank cap.
Fuel Line Filter
The fuel line filter should be replaced every 50 hours (operation)
or every 3 months, which ever occurs first or whenever
considered necessary.
Spark Plug, Pic 20
Spark plug should be checked every 50 hours (operation) or
every 3 months and replaced every 100 hours (operation) or
every 6 months, which ever occurs first or whenever considered
necessary.
1. Unplug the spark plug lead off the spark plug.
2. To clean use a wire brush/nail file and remove the carbon
deposits on spark plug base.
3. Check the spark plug gap using a feeler gauge. The gap
should be 0.7mm ≈ 0.8mm (0.028" ≈ 0.031").
4. The replacement spark plug is Torch F6TC or NGK BP6ES.
PIC. 19
PIC. 20
Spark plug lead
19
Fuel tank filter under
fuel tank cap

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents