Advertisement
To customize your 7 day program schedule, follow these steps:
Monday
1.
Select HEAT or COOL using the system key. You have to program heat and cool each separately.
2.
Press MENU
3.
Press SET SCHED
Note: Monday is displayed and the WAKE icon is shown. You are now programming the WAKE
time period for the Monday setting.
4.
Time is flashing. Use the
time period. Note: If you want the fan to run continuously during this time period, select ON with
the FAN key.
5.
Press NEXT STEP
6.
The setpoint temperature is flashing. Use the
for the Monday WAKE period.
7.
Press NEXT STEP
8.
Repeat steps 4 thru 7 for Monday LEAVE time period, for Monday RETURN time period, and for
Monday SLEEP time period.
Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday
Repeat steps 4 thru 7 for the remaining days of the week.
A Note About Auto Changeover:
Auto changeover will switch between heating
and cooling as needed. It is very important to
make sure the cooling setpoint temperature is at
least 3º above the heating setpoint temperature
and that the heating setpoint temperature is at
least 3º below the cooling setpoint temperature.
PROGRAMMING THE THERMOSTAT
or
key to make your time selection for the Monday WAKE
or
key to make your setpoint selection
A Note About Programmable Fan:
The programmable fan feature will
run the fan continuously during any
time period it is programmed to be
on. This is the best way to keep the
air circulated and to eliminate hot &
cold spots in your building.
12
Advertisement
