Environmental Protection; Packaging/Old Appliance; Energy-Saving Tips - Siemens WTN83201GB Installation And Operating Instructions Manual

Table of Contents

Advertisement

Environmental protection

en
Caution!
Material damage/damage to
the appliance
Cleaning agents and agents for
pretreating laundry (e.g. stain
removers, prewash sprays, etc.)
may cause damage if they
come into contact with the
surfaces of the appliance.
Therefore please note:
Do not allow these agents to
come into contact with the
surfaces of the appliance.
Clean the appliance with
nothing but water and a soft,
damp cloth.
Remove any detergent,
spray or other residues
immediately.
12
7
Environmental
protection
P ackaging/old appliance
E n v i r o n m e n t a l p r o t e c t i o n
)
Dispose of packaging in an
environmentally-responsible manner.
This appliance is designated according
to European directive 2012/19/EC
which governs waste electrical and
electronic equipment (WEEE).
The directive provides a framework for
the collection and recycling of old
appliances, which is valid across the
EU.

Energy-saving tips

Spin the laundry before drying. The
drier the laundry, the shorter the
drying time will be, thus consuming
less energy.
Load the dryer with the maximum
load.
Note:
Do not exceed the maximum
load for the programs, as this
prolongs the drying time and
increases energy consumption.
Ventilate the room and keep the air
inlet on the dryer free to ensure air
exchange.
Clean the fluff filter after each drying
cycle. If the fluff filter is dirty, the
drying time is prolonged and energy
consumption is increased.
Energy-saving mode: If the dryer is
not operated for a prolonged period,
it automatically switches off before
the program starts and when the
program has ended to save energy.
The display panel and indicator
lamps go off after a few minutes and
the Start button flashes. To activate
the lighting, press any button, open
or close the dryer door or turn the
program selector.

Advertisement

Table of Contents
loading

Table of Contents