Advertisement
USING THE BAND CLIP
To attach the band clip
1. Remove the band from the watch.
2. Insert the band clip into band attachment at
the bottom (6 o'clock position) of the watch,
and fasten the button to secure it in place.
How to wear the watch during Trekking Counter operation
Note that the Trekking Counter cannot take
measurements correctly while the watch is on
your wrist. When using the Trekking Counter,
be sure to use the band clip to attach the
watch to your belt. Your belt must pass
through the metal part of the band clip for
proper operation. If you are not wearing a belt,
attach the watch to a belt loop.
Trekking Counter Precautions
Be sure to turn off the Trekking Counter in the following cases. If you don't the Trekking
Counter may interpret your movements as steps and produce incorrect measurements.
• Any activity involving jumping, bending, stretching, etc.
• Resting
• Riding on a bicycle, train, bus, or any other vehicle that generates vibration
Any of the following conditions can cause Trekking Counter measurements to lose accuracy.
• Walking on loose ground, or steep up slopes or down slopes
• Running
• Shuffling your feet while walking
• Uneven stride
• Walking in sandals, shower shoes or similar footwear
• Walking up or down stairs
Trekking Counter measurements may become inaccurate or even fail entirely if the watch is
exposed to strong magnetic force.
Always be sure to fasten the band clip to the bottom (6 o'clock position) of the watch, and not
to the top (12 o'clock position).
Take care to avoid dropping the watch while walking.
When using the Trekking Counter, make sure the watch is not resting against your clothing or
waist pack. If the watch is not hanging loosely, the Trekking Counter will not be able to count
your steps correctly.
Band
Attachment
Band Clip
Top of watch
(12 o'clock position faces down)
- 4 -
Advertisement
