Timer Instructions - Waring WPG250TSWE Instructions Manual

• Insert allen wrench into adjusting screw
• To increase handle tension, turn allen
wrench clockwise
• To reduce handle tension, turn allen
wrench counter clockwise
• Remove allen wrench from adjusting
screw
• Lower adjusting screw cover (B)
• Return allen wrench to clip on
power cord
IMPORTANT: Locate allen wrench clip
on power cord and slide it closer to the
panini grill housing for easy
future access.

TIMER INSTRUCTIONS

The WPG250TSWE/WPG250TSW/WPG250TSWC are equipped with
a timer that can be easily installed. The timer does not control the
power of the unit.
Timer Installation
1. Installing the batteries
• Remove batteries from packaging
• Open battery box cover
• Install batteries as displayed on the inside of the battery box
• Once batteries are properly secured, slide battery cover back
into position until you hear a click and the cover is securely
closed
2. Installing timer into the unit
• Always be sure the appliance is unplugged and cool prior to
installing the timer
• Insert timer into the port until side tabs lock into place
• Your timer is now installed, operational and ready for use
3. Removing the timer
• Always be sure that the appliance is unplugged and cool prior
to removing the timer
9
A.
B.
SHOWN IN CLOSED POSITION