• Insert the mains plug into a properly secured mains socket. • Allow the device to cool down before transport and/or maintenance work. • Do not use the device in aggressive atmosphere. LED construction site spotlight PWLS 10-30 / PWLS 10-70...
Page 3
People who use this device must: device may be damaged. • have read and understood the operating manual, especially Note the information regarding transport and storage of the Safety chapter. the device. LED construction site spotlight PWLS 10-30 / PWLS 10-70...
On/off switch Finned housing Foot locking screw Foot Scope of delivery PWLS 10-30 and PWLS 10-70 • 1 x LED construction site spotlight • 1 x Manual Designation Transport handle Surface LED Locking screw LED construction site spotlight PWLS 10-30 / PWLS 10-70...
CEE 7/4 Power cable length 1.4 m Permitted ambient temperature -20 °C – +50 °C (when stored) Operating temperature -25 °C – +50 °C Permitted ambient conditions (RH) 10 – 90 % Type of protection IP65 Protection class LED construction site spotlight PWLS 10-30 / PWLS 10-70...
2. Pull the transport handle (1) away from the foot (7) and position it as desired. 3. Tighten the foot locking screws (6) on both sides of the device. LED construction site spotlight PWLS 10-30 / PWLS 10-70...
• Hold onto the mains plug while pulling the power cable out of the mains socket. • Allow the device to cool down. • Clean the device according to the Maintenance chapter. • Store the device according to the Storage chapter. LED construction site spotlight PWLS 10-30 / PWLS 10-70...
Your device still does not operate correctly after these checks? Please contact the customer service. If necessary, bring the device to an authorised specialist electrical company or to Trotec for repair. LED construction site spotlight PWLS 10-30 / PWLS 10-70...
Need help?
Do you have a question about the PWLS 10-30 and is the answer not in the manual?
Questions and answers