Fully Assembled Boiler
DHW Optional Pipe
Heat Only Boiler
NOTICE
Using proper brazing or soldering technique, insert
copper flush bushing into copper tee with threading
up and non-threaded end down. If the threaded end
is not UP the TP gauge cannot engage the threads
in the bushing.
VERIFY CONTENTS RECEIVED
30 PSI Safety Relief Valve
Copper Flush Bushing
1/2" x 1/4" NPT
Temperature Pressure
Gauge (2" Shank)
Copper Tee
1-1/24" x 1-1/4 "x 1/2"
Threaded End
Non-Threaded End
Copper Tee
2
3/4 NPT Ball Gas
Shutoff Valve
Includes Essential
Documents and Warranty
11x17 Wire Diagrams
Document Package
240012874 REV A, [01/31/2020]