Sewing With An External Picotop Control Panel - Pfaff PicoDrive P40PD Instruction Manual

8.3 Sewing with an external PicoTop control panel

Sewing without a sewing program (manual sewing)
Precondition:
Shown on the display (Fig.8.8)
target stitches for front backtack
The target stitch numbers for the front and end backtacks can only be set when the machine is at standstill:
for front backtack with
for end backtack with
Shown on the display during sewing (Fig. 8.9)
- after starting if parameter <605> = 1
p4xpd-2-en
Key 11 (P/M) is unlit
key A+ or B+ or
key A - or B-,
key C+ or D+ or
key C - or D-.
8.4
target stitches for end backtack
Fig. 8.8
actual speed
Fig. 8.9
08-08-29