Lcd Display Functionality - Prism Medical UK C800 Owner's Manual

LCD Display Functionality

Default Display Modes:
The lift unit can be set to either of the following as the 'Default' display mode:
1. Battery Level (the factory setting for the Default Display Mode); or,
2. Number of Lifts.
To change from one operating mode to another please call your local service technician.
In Battery Level Mode the lift will: (Factory Setting)
1. Display the word, "Battery", with the percentage charged (in 5% increments) in the top
row of the display (e.g., "Battery 65%").
2. Display a bar graph of the battery level in the second row of the display by displaying the
appropriate number of fully blackened rectangles as in the following diagram:
B a t
Note: As the lift is initially switched on, the level of battery charge displayed may be
incorrect. However, as soon as the lift is actually operated, the charge level will update to
the correct level.
In Number of Lifts Mode the lift will:
3. Display the word, "Lifts", with the number of lifts completed in the top row of the display
(e.g., "Lifts 500") and a bar graph to indicate the battery level:
L i f
In any 'Default display mode', if the battery levels fall below 25% the lift will go into Low Battery
Mode. The lift will then:
1. Change the indicator light on the lift to ORANGE.
2. Make an audible beeping sound every ten (10) seconds.
3. Display will show the battery % in the first line and the charge level bars in the second
line.
If the battery are fully depleted the lift will then:
1. Change the indicator light on the lift to RED.
2. Make an audible beeping sound every ten (10) seconds.
3. Display will show "Low Batt!"
C 800 - User Guide (753106)
t e r y 5
t s x x , x x x
Rev: 9 JUNE 2016
0 %
Page: 20