Table of Contents
Advertisement
Quick Links
ELECTRIC STOVE HEATER
OWNERS MANUAL
101001, 111001
Only use this heater as described in this manual. Any other use is not
recommended by the manufacturer, and may cause fire, electric shock, or
other personal injury.
WARNING! Read and understand this entire owner's manual, including all
safety information, before plugging in or using this product. Failure to do
so could result in fire, electric shock, serious personal injury, or death.
WARNING! INDOOR use only! NEVER use this heater outdoors!
SAVE THESE INSTRUCTIONS!
CAUTION! Keep this owner's manual for future reference. If you sell or give
this product away, make sure this manual accompanies this product.
NO VENTING REQUIRED
AC120V / 60 HZ 1500W
Advertisement
Table of Contents
Related Manuals for Eden Branch Products 101001
Summary of Contents for Eden Branch Products 101001
- Page 1 ELECTRIC STOVE HEATER OWNERS MANUAL 101001, 111001 Only use this heater as described in this manual. Any other use is not recommended by the manufacturer, and may cause fire, electric shock, or other personal injury. WARNING! Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product.
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION! WARNING ⚫ ALWAYS keep electric cords, home furnishings, drapes, clothing, papers, or other combustibles at least 3 feet (0.9m) away from the front of this heater, and away from the bottom, sides, and rear of this heater. ⚫... - Page 3 WARNING ⚫ Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside! ⚫ ALWAYS disconnect this unit from the power supply before performing any assembly or cleaning, or before relocating the electric fireplace. ⚫ ALWAYS store this heater in a dry location. NEVER use the fireplace if it has become wet.
-
Page 4: Tools Needed For Assembly
PREPARATION ⚫ Remove all parts and hardware from the carton and place them on a clean, soft, and dry surface. Make sure all parts are dry, and the power cord and plug are not damaged. See IMPORTANT SAFETY INFORMATION on pages 2 and 3. ⚫... -
Page 5: Parts And Hardware
PARTS AND HARDWARE Item Description Stove Legs Screws ASSEMBLY INSTRUCTIONS ALWAYS make sure the unit is unplugged before beginning assembly! NEVER move or clean the heater, or change the bulb, while it is plugged in. - Page 6 1) Carefully turn the STOVE (A) upside down and lay it on a clean soft surface. 2) Thread three SCREWS (C) through the holes in the leg, and into the stove frame. Partially tighten with a Phillips screwdriver. 3) Repeat Steps 2 and 3 for the other three legs. 4) Check the alignment and tighten all 12 screws securely with the screwdriver.
-
Page 7: Operation
OPERATION When the heat function is used for the first time, a slight odor may be NOTICE present. This is normal and should not occur again unless the heater is not used for an extended period of time. BUTTON ACTION / FUNCTION INDICATION / RESULT 1. -
Page 8: Maintenance
Cleaning Metal: ⚫ Buff using a soft cloth, slightly dampened with a citrus oil-based product. ⚫ DO NOT use brass polish or household cleaners as these will damage the metal. Glass: • Use glass cleaner and dry thoroughly with a paper towel or lint-free cloth. •... -
Page 9: Limited Warranty
Limited Warranty J & J Global (Seller) warrants to the original Buyer only, that each product will be free from defects in material and workmanship for a period of one (1) year from date of purchase. SELLER’S SOLE OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE THE REPAIR OR REPLACEMENT OF PARTS, WITHOUT CHARGE, WHICH ARE DEFECTIVE IN MATERIAL OR WORKMANSHIP.
Need help?
Do you have a question about the 101001 and is the answer not in the manual?
Questions and answers