Advertisement
5.
Verify that the touch screen is successfully connected to your codec by checking
the codec address displayed in the top banner.
The touch screen is ready to use.
The touch screen
menu and contact list
Change the IP settings
If you need to use static IP addresses, contact your network administrator to
get the parameters you need for your system.
i.
Tap IP Settings.
ii.
Select the appropriate
IP Version, then select
Manual IP Assignment.
iii.
Enter the required
parameters (a keypad
appears when you tap in a
text field).
iv.
Tap Save to activate the
changes, or Undo to leave
without saving.
Back
Settings | IP Settings - Touch Screen
IP Settings - Touch Screen
IP Settings
IP Version
IP Assignment
IP address
Subnet mask
Gateway
Link Settings
Voice VLAN Mode
Voice VLAN ID
name@company.com
Back
Select codec to pair with
System name (Codec type)
name@company.com
Select codec manually...
IPv6
IPv4
Auto
Manual
192.168.1.130
255.255.255.0
192.168.1.1
Auto
Manual
0
— 6 —
IP Settings
Undo
Save
Off
Advertisement
