Advertisement
A list of all codecs that are in Pairing visibility mode is displayed on the touch screen.
5.
Tap the codec name in the list.
Note:
If your codec is not in the
list, read about
What to do if your
codec is not listed
6.
Review codec details and tap
Start Pairing to start the
pairing process.
7.
If required, the touch screen
downloads and installs new
software from the codec. The
touch screen automatically
restarts after the software
upgrade. This process may take
a few minutes.
8.
If your codec is password
protected, you will be
prompted for an administrator
username and password to
sign in to the codec.
Continue when the menu and
contact list appear on the
touch screen.
9.
Verify that the touch screen is successfully paired to your codec by checking the
codec address displayed in the top banner.
The touch screen is ready to use.
The touch screen
menu and contact list
on page 7.
Back
Select codec to pair with
System name (Codec type)
name@company.com
Select codec manually...
System name (Codec type)
Back
name@company.com
Product:
Cisco TelePresence System Codec
SIP URI:
name@company.com
H323 id:
name@company.com
Software:
TC4.1.0
IP address:
192.168.1.128
Serial number:
CBA123456789
name@company.com
— 4 —
Refresh list
IP Settings
Start Pairing
Advertisement
