Page 3
SAFETY NOTICE-IMPORTANT!!! The following important notes must be followed carefully to run the camera and respective accessories in total safety. The camera and relative accessories are called video system in this section. Before installing the camera, please read this manual carefully. Please follow installation instructions indicated in this manual during installation.
Page 4
Do not move the camera head manually. In doing so would result in malfunction of the camera. Do not hold the camera head when carrying the video camera. This camera is for indoor use only. It is not designed for outdoor use. ...
CONTENTS ABOUT THE PRODUCTS ------------------------------------------------------ 1 -------------------------------------------------------------------------------- 1 FEATURES ------------------------------------------------------------ 1 & LIST OF PARTS ACCESSORIES ---------------------------------------------------------------- 2 & MAIN PARTS INTERFACES INSTALLATION ----------------------------------------------------------------- 3 ---------------------------------------------------------------------------- 3 INSTRUCTIONS CONNECTIONS ----------------------------------------------------------------- 4 MENU SETTINGS --------------------------------------------------------------- 5 ...
Provide open SDK for user-defined About The Products features. The products is a full HD mobile waterproof List Of Parts & Accessories cameras, optional wifi (built-in 5G wifi and When you open the box, check all accessories lithium battery module) and network models. according to the packing list. Used for fixed & mobile football recording and capturing.
Main Parts & Interfaces 3 aviation plug Network model Camera Front View 3 cables Bottom View 1 Camera module 2 waterproof switch Rear View Wifi model 4 install hole 1/4”inch thread,used for fix mounting。 ...
User should prepare a tripod with a ¼ inch INSTALLATION threaded connection column by self, then the ¼ inch threaded hole at the bottom should aligned to the clockwise direction INSTRUCTIONS of the connecting column on the tripod, make sure the fixed mount before release Tripod installation your hands.
Menu Explanation Submenus From main menu, navigate to select Main MenuCall Preset #95 to enter <EXPOSURE> menu, click IRIS+ to enter. menu. <EXPOSURE>Set menu. <MENU> ❶ VIDEO <EXPOSURE> ❶ ❸ EXPOSURE MODE MANUAL COLOR ...
1/425, 1/600, 1/1000,1/1250, 1/1750, COLOR MENU 1/2500, 1/3500,1/6000, 1/10000. COLOR is used to set the color values. IRIS PRI: Gain and shutter speed value are < COLOR > adjusted automatically according to working WB MODE MANUAL ...
RESTORE DEFAULTS < RESTORE DEFAULTS> PRESS OK CONFIRM PRESS BACK CANCEL []BACK RESTORE DEFAULTS option is used to reset all menus to default value. Press to confirm;...
Internet Explorer Network Setting 1 Make sure PC and LTC in the same LAN; 2 support Windows 7 and above system,not support Windows XP Quick Guide 3 Input IP address+ port number 88 (default is The camera can be accessed and controlled 88) in the IE address bar: via the following ways: http://IP:88, such as:...
IPCamConf Setup IPCamConf from the disc in the packing, and connect the camera to the same LAN, then enter the main interface as following. Pic 1-1 Main interface includes:System menu、camera list、video control、video view、camera subject information. ● System menu:The entrance to above 5 major function setting; Pic 1-2 ●...
Page 21
Pic 1-3 ● Video control: To set the Pan/Tilt/Zoom of the camera; Pic 1-4 ● Video View: To get the video information of the camera, snapshot, audio playback settings and SD card video. ...
● Camera subject information:Device ID, IP address, video statue, Type, Image edition and etc. Pic 1-6 Local monitoring and setup The IP camera is a plug and play device within the LAN, which can quickly realize the monitoring within the LAN.
Page 23
PTZ control and presets, cruise setting Double click one camera, then the PTZ control, presets and cruise Settings can be carried out in the PTZ page of video control area Figure 1-7 Left side: proceed PTZ control, including PTZ direction adjustment, scene zooming, focusing and aperture adjustment, will display prompt message when the mouse is moved to the button.
Page 24
Figure 1-8 2) Cruise setting and start & stop Cruise means the camera scans the scene according to the preset path (the information of the cruise path needs to be provided by the presets setting). Cruise path setup steps: ●...
Page 25
Figure 1-9 Color Settings Click the color button to set video-related parameters as required. Figure 1-10 Color: in proper order are brightness, contrast, color and saturation of the display screen. Snapshot and audio management At the bottom of the video view, are snapshot, audio, and SD card video management. ●...
Page 26
Slide the microphone volume cursor to adjust the volume. Figure 1-11 ● Click to start/ stop SD card recording. Camera information In the camera list, double-click the name of a camera (the selected camera will be changed to red) to view the video image of the camera in the video view area.
Page 27
● Camera version: shows the version of the camera. Video playback Select [playback] from the system menu and the software enters the video playback interface. Click [real time] to exit the interface. Figure 1-14 ● Video playback Select a camera to playback, at the bottom of the playback of the video view, select the playback time, set the playback speed, and capture the video snapshot and save the function.
Page 28
default user name is admin. Password: empty. Method: click to update the password and enter OK according to the prompt ● PTZ setting: if the camera configure the external PTZ, the address and baud rate need to be configured. ●...
Page 29
Figure 1-17 1) Start recording: when checked, the recording will start and the recording file will be saved on the SD card, then the operation of other parameters can be effective. ● Video recording: select this option to indicate that once the camera is online, it will automatically record the video and save the recording file on the SD card.
Page 30
Figure 1-18 ● unselected list: the webcam in this list indicates that no upgrade is required ● Selected list: the network camera in this list indicates that an upgrade is required ● Select the camera to upgrade: select the camera that needs to be upgraded from the unselected list and upgrade by moving to the selected list.
Page 31
Select the camera you want to download and click start to download. If you want to cancel the download, click stop to download. Click to open the directory to see the save path of the downloaded video file. Figure 1-19 ●...
Page 32
Figure 1-20 ●RTMP URL: represents the identifier to be configured to transmit video stream to RTMP server, which can be self-setup. ●Camera port: represents the port that transmits the video data of the camera. When setting the port, select 1 port with a range of 3479~7997, and select 5000 in the example diagram. Then click the save icon on the right.
Page 33
● Subnet mask: use the same parameters as other PCS in the LAN. ● Default gateway: use the same parameters as other PCS in the LAN. ● DNS server - preferred: use the same as other PCS in the LAN. ●...
TROUBLESHOOTING Problem Possible Cause Solution Power supply failure Check power supply action Power adapter damaged Replace power adapter image after powered on Power cable connection got Check & reconnect loosen Power cable is too long Use a shorter cable self-testing after powered...
Page 38
The user manual is only for a reference, if there are any changes or differences, please ask for the latest version from your supplier CA/YF-AMCF-ZD-016 Y06020708002 ...
Need help?
Do you have a question about the AMC-F2002W and is the answer not in the manual?
Questions and answers