Table of Contents
Advertisement
Mounting
Step 1:
Determine an appropriate mounting location.
Step2:
Confirm there is adequate access and clearance for the wiring and its
connections.
Step3:
Secure the FPC8 TL with 2 self tapping mounting screws (not supplied).
NOTE: The FPC8 TL may be mounted anywhere inside the vehicle,
inside the warning device or any convenient location that is determined
by proper planning and installation techniques.
Wiring and Setup Instructions
1. Looms, grommet, cable ties or other installation hardware should be used to an-
chor and protect wires
2. All wire should conform to the minimum wire size as specified by the manufacturer.
3. Splices should be minimized and made in a fashion so as to protect from corrosion
to reduce loss of conductivity.
Note: This product is designed to control LED based light bars and warning
beacons connecting this to regular or halogen lamp loads could compromise
the safety and reliability of this product.
PART#: 212-0047
Warning
October 18, 2019
Advertisement
Table of Contents
