Summary of Contents for PSC Euro Cart
- Page 1 Euro Cart Compact Equipment Cart Made in the USA Operation Manual Version 1.0 Copyright 2013 Professional Sound Corporation Printed in the U.S.A.
- Page 2 Thank you for purchasing the Professional Sound Corporation Euro Cart. PSC is confident that the Euro Cart has set new standards in design for a compact, easy to use and transport equipment cart. Please feel free to contact us at the address below if you have any comments, suggestions, or questions about your new PSC Euro cart.
- Page 3 The entire cart is made of aircraft aluminum and hand TIG welded in the U.S.A. In addition, PSC offers a specific built power distribution system called the PSC PowerStar Euro for use with this cart.
-
Page 4: Parts Identification
PARTS IDENTIFICATION: Before you start assembly of the PSC Euro Cart, please take a moment to make sure you understand and can identify all of the parts. Below is a list of the parts required. You may notice that we included a few additional bolts. We have provided these to you as spare parts in case you ever lose one. - Page 5 ASSEMBLY: 1. Locate the “base” of the cart and sit in on the floor, upside down. 2. Locate the two rubber bumpers and thread them into the two threaded holes on the bottom side of the cart base as shown in the photo below: 3.
- Page 6 5. Locate the “Hairpin” clips that are used to secure the wheels to the axels and install them on the outside of each wheel as shown in the photo below: 6. Locate the two lower uprights. The lower uprights each have a metal connecting link sticking out of the top of the upright.
- Page 7 7. Locate the two (2) boom Cups with the two (2) of the ¼-20 SHORT Thumb Screws. Install the two boom cups by inserting the thumb screws though the boom cups and threading them into the threaded inserts in the rear of the cart base as shown in the photo below: 8.
- Page 8 9. Locate and install two (2) of the 3/8-16 Short thumb screws into the back of the bottom uprights, tightening the two sections of the uprights together. Once you have done this, your cart should look like the photo below:...
-
Page 9: Helpful Hint
We recommend that you locate the bottom shelf so that it is “UP” one set of holes form the bottom most position if you plan on using our PSC PowerStar EuroLiFE power distribution system. - Page 10 You may find it easier to install the shelf securing thumb screws if you gently lift up on the out edge of the shelf while you thread in the thumb screws as shown in the photo below: 13. Locate the remaining Large shelf and another four (4) 1.4-10 x 2.00” thumb screws.
- Page 11 15. Your cart should now look like the photo shown below: 16. Locate the handle assembly and two (2) of the 3/8-16 SHORT thumb screws. Place the handle assembly on top of the upright frame members as shown in the photo below: Gently install the two thumb screws until they are partially thread in only.
- Page 12 18. Your PSC EuroCart is now fully assembled. It is now time to go back and tighten up all of the thumb screws you have previously installed.
-
Page 13: Optional Accessories
OPTIONAL ACCESSORIES: 1. RACK MOUNT EARS PSC offers an optional rack mount kit that allows you to mount up to four (4) spaces of rack mount gear. This would typically include LCD video monitors and wireless receivers. The lightweight yet strong rack mount ears are easily mounted to the PSC EuroCart using the supply ¼-20 x 5/8”... - Page 14 (use) and downward (travel positions) *NOTE* the PSC UHF Log Periodic Antennas shown in the photos are not included with the cart or antenna mounting bar option. They can be purchased from any PSC dealer as our part number FPSC0044.
- Page 15 The new PSC PowerStar EuroLiFE is based on our very successful PowerStar LiFE. This new unit was designed to complement our new PSC Euro Cart. Small in size and big in power output, the PSC PowerStar EuroLiFE will power everything on your new cart with ease. The main power distribution unit is very small and compact.
-
Page 16: Lighting Equipment
While no power filter can eliminate all potential noise issues, we feel the added value of our filters make the PSC line of power products better than the rest. This designed in feature is a PSC exclusive. -
Page 17: Terms Of Use
THESE TERMS. LIFTING INSTRUCTIONS: This PSC EuroCart has been designed to be as light weight as possible for your convenience in the field. Because of this light weight design, care must be taken when lifting the cart into and out of work vans, sound stages, camera trucks, etc This cart has been powder coated two distinctive colors for a very valid reason. - Page 18 Limited Warranty Professional Sound Corporation warrants the PSC EuroCart to be free of defective material and workmanship for a period of one year from the original date of purchase and agrees to repair or replace such defective part(s) or the whole product at its option, provided that the equipment is returned to Professional Sound Corporation.
- Page 19 SPECIFICATIONS: 37” Tall x 19” Wide x 21” Deep (94cm x 48cm x 53cm) Size: Small Shelf 14.5” Wide x 10” Deep (36.8cm x 25.4cm) Self Size: Large Shelf 14.5” Wide x 14.5” Deep (36.8cm x 36.8cm) Weight: 27.8Lbs (12.6Kg) Material: Aircraft Aluminum Construction:...