Electrolux PARTNER BV25 Instruction Manual page 5

2. Push the small end of the elbow tube
through the small opening in the bag.
Elbow
Tube
Zipper
Opening
NOTE:
Make sure edge of the small open-
ing is flush against the flared area of the el-
bow tube, and the rib on the elbow tube is
on the bottom.
3. Close the zipper on the bag. Make sure the
zipper is closed completely.
4. Remove blower tube from engine.
Groove
5. Insert the elbow tube into the blower outlet.
Make sure elbow tube rib is aligned with
the blower outlet groove.
6. Turn knob clockwise to secure elbow tube.
VACUUM TUBE ASSEMBLY
1. Align the lower vacuum tube as shown.
Push lower vacuum tube into upper vacuum
tube until the lower tube is securely seated in
the upper tube (about 7 cm). When vacuum
tubes are fitted together, locate the label on
the lower portion of the upper tube. Perma-
nently assemble the two tubes together with
the supplied screw.
Upper
Lower
Vacuum
Vacuum
Tube
Tube
2. Insert the tip of a screwdriver into the latch
area of the vacuum inlet.
Latch
Area
3. Gently tilt the handle of the screwdriver to-
ward the back of the unit to release the
latch while pulling up on the vacuum inlet
cover with your other hand.
Small
4. Hold the vacuum inlet cover open until up-
Opening
per vacuum tube is installed.
Rib Retaining Post
5. Place the hooks of the upper vacuum tube
on the retaining posts of the unit.
6. Pivot the tube until it is secured to the
blower unit by the vacuum inlet latch.
Rib
PIVOT
HOW TO CONVERT UNIT FROM
VACUUM USE TO BLOWER USE
1. Remove the vacuum tubes by inserting
the tip of a screwdriver into the latch area
of the vacuum inlet.
2. Gently tilt handle of screwdriver toward
the back of the unit to release the latch
while pulling up on the upper vacuum tube
with your other hand.
Latch Area
Blower
Outlet
Latch Area
3. Remove the vacuum bag.
4. Close the vacuum inlet cover and make
Vacuum
sure it is latched closed.
Inlet Cover
5. Reinstall the blower tube (see BLOWER
TUBE ASSEMBLY).
-- 5 --
Vacuum Inlet
Vacuum
Inlet
Cover
Inlet Cover
Latch
Retaining
Hook
Post