Table of Contents
Advertisement
To obtain a clear playback picture
If the playback picture does not
appear clearly in step 5 above, turn
the RF CHANNEL screw on the
rear panel of the unit with a
screwdriver to a position where the
TV clearly displays the playback
picture.
Selecting the TV system
For your TV to receive the correct
signal from your unit, you must set
the TV SYSTEM switch on the rear
panel of the unit to either G (for
system B/G) or K (for system D/K).
If this switch is set to the wrong
position, the sound will be distorted.
RF CHANNEL
TV SYSTEM
G
K
SLV-XF245TK/XA125TK
9
Getting Started
3-859-241-11 (1)
Advertisement
Table of Contents
