Panasonic TX-32LXD500 Service Manual page 18

7.9. Removing the DV-Board
1. Remove the DG-Board with DV-Board. (See 7.8.)
(See above figure in item 7.8.)
2. Remove a fixing screw ( ) (reverse side) and remove the copper
foil sheet carefully not to brake.
3. Disconnect the coupler (DV15-DG10) and remove the DV-Board.
7.10. Removing the AP-Board
1. Remove the rear AV bracket ass'y (See 7.4.) and the rear metal
frame. (See 7.5.)
2. Disconnect the couplers (AP2, AP6 and AP10 (AC Cord)) and the
bridge cables (H1 (AP1) on the H-Board, P3/CN201 (AP3) on the P-
Board and DG4 (AP4) and DG5 (AP5) on the DG-Board.
3. Remove the fixing screws (7pcs).
4. Remove the AP-Board.
7.11. Removing the H-Board
1. Remove the rear AV bracket (See 7.4.) (and the rear metal frame).
(See 7.5.)
2. Disconnect the flexible cables (H2 and H3), the bridge cable (H1)
and the couplers (H4, H5, H6, H8 and H9).
3. Remove the fixing screws (4pcs).
4. Remove the H-Board.
18