Status Menu - Leprecon ULD-340DMX-HP User Manual

Status Menu

When the ULD-340 is in the Channel mode, pressing 'MENU' again will start the
Status mode. When Status mode starts, the state of each channel will be shown
in sequence, with the display cycling from Channel 1 to Channel 4, then
automatically cycle back to channel 1. This automatic cycling is indicated by the
flashing colon.
The Status Mode first displays the current input state of the dimmer channels 1-
4. If valid DMX is present, the letter 'd' is displayed, followed by the DMX value
for the channel:
If there is no DMX present, the 'd' letter will disappear, and a '-' will be shown
instead:
d1 : 00
-1 : 00
- 9 -