Table of Contents
Advertisement
Section 2 - Installation
4
Place the baseplate over the holes that are in the wall. Make sure to
/
align the baseplate holes with the holes in the wall. Use the supplied
screws to attach the baseplate to the surface of the wall.
5
Place the camera over the baseplate with the alignment nub pointing
/
left, then attach the camera by rotating it until the alignment nub
points up.
6
Adjust the angle and rotation of the camera as desired. You can also
/
rotate the camera on the baseplate about 45° to the right or left.
D-Link DCS-8010LH User Manual
11
Advertisement
Table of Contents
