Section 2 - Installation
1
Rotate the baseplate counter-clockwise and remove it.
/
2
Place the baseplate where you want to position the camera and use a
/
pencil to mark the holes. You can use the lower holes for a removable
installation, or the top holes for a fixed one. Make sure that the arrow
on the baseplate is pointing up.
3
Depending on the material of the wall or ceiling, use proper tools to
/
drill holes 25 mm deep with a 6 mm drill bit where you marked. For
plaster, drywall, or concrete walls, insert the plastic anchors first to
support the screws.
D-Link DCS-8010LH User Manual
Mounting the Camera
10