Saeco XELSIS EVO HD8954 User Manual page 79

EMPTY DRIP TRAY PLACED
UNDER THE BREW GROUP
OK
FILL THE CARAFE HALFWAY
WITH FRESH WATER AND INSERT
IT IN BREWING POSITION
OK
PLACE A CONTAINER UNDER HOT
WATER & CARAFE DISP. SPOUTS
OK
DESCALING CYCLE
STEP 2/2
RINSING CYCLE...
PAUSE
21/12/12
USER BEVERAGE
MENU MENU
SETTINGS
SELECT
MENU
USER
04:17 pm
10
Empty the (internal) drip tray and place it back. Then, press the "OK"
button.
11 Empty the milk carafe and fi ll it with fresh water. Insert it back in the
machine. Press the "OK" button.
12
Empty the container and place it back under the hot water/steam
wand and milk dispensing spout of the carafe. Press the "OK" button.
13
The rinsing cycle is activated. The bar shows the cycle progress.
14 When the amount of water needed for the rinse cycle has been
completely dispensed, the machine automatically ends the descaling
process by showing this display after a short heating up phase.
15
Remove and empty the container.
16
Disassemble and wash the milk carafe as described in the "Weekly
cleaning of the milk carafe" chapter.
17
Empty the (internal) drip tray and place it back.
18
Place back the "INTENZA+" water fi lter into the water tank if it was
installed.
ENGLISH
77 77