Remove Battery - NESA NS-651 Owner's Manual

26. OSD button
In DVD mode press it to enter the OSD menu, press and hold for 2 seconds to set video setup.
(RED /GREEN /BLUE /BRIGHT / CONTRAST /SHARP /COLOR RESET /BACK)
27. VOL- button
Press to decrease volume level.
28. AUDIO/GOTO button
In DVD mode press it to select the audio language.
In VCD mode, press it to select the sound track in the sequence of MONO L =>MONO R
=>STEREO.
Go to: in DVD mode，press and hold for 2 seconds to show TIME SEARCH menu, select
number and confirm to go to certain position directly. When press
TITLE/CHAPTER selection mode, select number and confirm to go to certain TITLE or
CHAPTER position directly.
29. Digit 0-9 buttons
In radio mode, select 1-6 the desired band; In DVD mode, select track.
Noted：The RC is the universal and full-featured. Some options are available with the
corresponding model.

REMOVE BATTERY

Note:
 The distance may vary according to the
brightness of ambient light.
 If the remote is not used for an extended period
of time, remove the battery to prevent possible
damage from battery leakage and corrosion.
 Do not place any objects between the remote control unit and the sensor on the unit.
 Do not drop the remote control onto the floor; it will damage it beyond repair.
 Do not use the remote control unit, while simultaneously operating the remote control unit
of any other equipment; they may interfere resulting in improper operation.
 The battery normally last for about one year although depending how often the remote
control is used. If the remote control unit isn‟t working even when it is operated near the unit,
replace the battery with a new battery of the same make and use only a lithium cell battery
type: CR2025 (3V).
 Dispose empty batteries in accordance with your local governmental regulations.
 Do not short-circuit, disassemble, heat or dispose of fire or flames the battery.
 Keep the battery out of reach of children, should the battery be swallowed, immediately
consult a doctor.
11
button to enter