Remove The Woofer; Remove The Stand Bracket; Remove The K-Board; Remove The S-Board - Panasonic TX-P50VT30E Service Manual

9.15. Remove the Woofer

1. Unlock the cable clampers to free the cable.
2. Disconnect the Relay connector.
3. Remove the screws (×3

9.16. Remove the Stand bracket

1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.
2. Unlock the cable clampers to free cable.
3. Remove the Stand bracket fastening screws (×9
) and the Stand bracket.

9.17. Remove the K-Board

1. Remove the SP shield metal L. (See section 9.14.)
2. Remove the Stand bracket. (See section 9.16.)
3. Remove the screw (×1
4. Remove the claws (×3
5. Disconnect the connector (K1) and remove the K-Board
from the LED panel.
) and remove the Woofer.
).
).

9.18. Remove the S-Board

1. Remove the SP shield metal L. (See section 9.14.)
2. Remove the screws (×2
3. Disconnect the connector (S10) and remove the S-Board.

9.19. Remove the V-Board

1. Remove the SP shield metal R. (See section 9.14.)
2. Remove the Stand bracket. (See section 9.16.)
3. Remove the screw (×1
).
4. Disconnect the connector (V14) and remove the V-Board
from the 3D emitter panel.
, ×4
9.20. Remove the Bottom cabinet
assy
1. Remove the Speakers. (See section 9.14.)
2. Remove the Stand bracket. (See section 9.16.)
3. Remove the K, S and V-Board. (See section 9.17 - 19.)
4. Remove the screws (×2
inet assy.
30
).
) and remove the claws (×3
) and remove the Bottom cab-