Mounting - Siemens 7KE6000-8AH /CC Operating Instructions Manual

Sync-FO-Multiplexer

Mounting

Mounting
q
The unit should be mounted at a location that is free of vibrations. The admissible ambient
temperature (recommended or permissible operating temperature) may not be exceeded
(see Technical Data).
q
Operation of the unit outside the permissible operating temperature range may lead to
malfunctions and failure of the unit.
q
The converter can be snapped onto a 35 mm DIN EN 50022 rail.
Connection
q
The electrical installation has to be carried out in conformity with the regulations for the
erection of electrical power installations.
q
Only FO cable assemblies of the specified types may be used.
q
For admissible types of FO cables, please refer to the Technical Data.
E50417-K1074-C295-A1
Warning
When operating electrical devices, certain parts of these devices are
subject to dangerous voltages. Therefore, noncompliance with the safe-
ty notices may cause severe bodily injury or property damage.
Only adequately qualified personnel may mount and connect the de-
vice.
In particular, all warnings must be strictly observed.
English
31