Download Print this page

DuraMax FENCE Installation Manual

Table of Contents

Download this manual

Engineered For The Southwest Sun

Fence Installation Guide

Table of Contents

Need help?

Do you have a question about the FENCE and is the answer not in the manual?

Page 1 Engineered For The Southwest Sun Fence Installation Guide...
Page 2 • Fig. 1 Sample Staking and Post Layout Run a string line to locate the fence line, using the line to establish the outside faces of your posts (Fig 1). • Stake out the fence posts, locating line, corner, end and gate posts. Mark the centers of the post locations •...
Page 3 Step 3. Assemble and install fence sections Having set your posts, you are now ready to assemble the fence sections for your fence style. Style speci c section assembly instructions are described below. Remember – Protect the nish of your fence during assembly by assembling on a dry, clean and at surface.
Page 4 Bottom Rail (1) Install picket caps, assemble and install the fence sections Note: Line, End and Corner Posts using the Straight Picket installation steps above.
Page 5 Each box includes: Step 3. Continued Rails (6) Ranch Rail a) Install Rails clips: I nsert supplied rail clips (Fig. 6) Note: Line, End and into both ends of the rails before inserting rails into Corner Posts and posts. If trimming rails is required, drill a ½” hole Post Caps at cut ends to accept the rail clip.
Page 6 Fig. 11 Post Bracket Locations for Stair Stepping Picket Follow the slope with the fence (Fig. 12). Picket rails are routed to accommodate most shallow slopes. To keep pickets vertical on steeper slopes, the picket slots on the pre-routed top and bottom rails may to be elongated with a le by ⁄...