Connection And Preparation; Connecting The Antenna And The Mains Cable; Inserting Batteries In The Remote Control; Overview - Grundig DAVIO 37 Manual

Hide thumbs Also See for DAVIO 37:
Table of Contents

Advertisement

TV
R
EURO-AV
P
P
4

CONNECTION AND PREPARATION

Connecting the antenna and the mains cable

1
Insert the telescopic antenna (P 37 only) in the recess on the rear panel.
2
Plug the roof antenna cable or the telescopic antenna into the antenna socket
É
»
« on the television set.
3
Insert the power cord plug in the socket.

Inserting batteries in the remote control

1
Open the battery compartment by removing the lid.
2
Insert battery (type Mignon, 2 x 1.5 V, R6/UM3/AA).
Observe the polarity (marked on the base of the battery compartment).
Note:
If the television no longer reacts properly to remote control commands, the
batteries may be flat. Always remove flat batteries. No liability is accepted
for damage resulting from leaking batteries.
Environmental note:
Batteries, including those which are free of heavy metal, must not be
disposed of with household waste. Please dispose of used batteries in an
environmentally sound manner. Observe the legal regulations which apply in
your area.

OVERVIEW

The front of the television set

IO
z P
+
y
AUDIO IN
y
VIDEO IN AUDIO IN
VIDEO IN
_______________________________________________________________________
Switches the television to stand-by mode.
Switches the television on from stand-by mode;
preset button for volume and channel selection.
Channel selection up;
raise volume.
Channel select down;
lower volume.
Headphone jack (3.5 mm ø jack plug, located on the
side of P 37).
– Connecting a headphone set deactivates the loud-
speakers.
Audio input (located on the side of P 37).
Video input (located on the side of P 37).
_______

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents